Loading ...
Loading ...
Loading ...
5V USB OUTPUT CHARGING
TORQUE
REGULATOR
11
OPERATING
CAUTION: Do not expose either the electric tool or charger to the rain or
water.
Do not overcharge the battery as this could damage the battery's cells.
Do not force the tool. If the tool is stalling, it is possible that the battery
power is low. If so, stop working and recharge the battery pack.
To prolong the life of the tool, do not continually for work more than 20
minutes at a time.
1. Plug the device USB cable into the USB Output Port (A) on the battery
Pack (Fig.4)
1. When arrow on the top of the housing points to 1 on the Torque
indicator scale (D in the functional description), torque is at minimum
before the clutch disengages the chuck from the drive.
2. When indicator is just past 15, output is at maximum before it is
disengaged. This is useful in driving screws into different types of
material.
3. More torque will set a screw deeper into material, less torque will
prevent it stripping. Larger screws require more torque to drive than
2. Press the button (B) to display the battery level.(Fig.5) Three lights
show all power. Two lights show 50% of the charge. A lamp shows
25% of the electricity.
NOTE: Please remove the charger from the battery before checking
the battery level.
Loading ...
Loading ...
Loading ...