Loading ...
Loading ...
Loading ...
46
FAULTS
CAUSE
SOLUTION
9. Presence of
white spots on
dishes
Mains water is too hard
Check salt and rinse aid level and
regulate. Should the fault persist,
contact the Technical Assistance
Centre
10. Noise during
wash
The dishes knock against one
another
Re-check loading of dishes in the
basket
The revolving arms knock
against the dishes
Re-check loading of dishes in the
basket
11. The dishes
are not
completely dry
Inadequate air flow
Leave the dishwasher door ajar at
the end of the wash program to
allow the dishes to dry naturally
Rinse aid missing
Fill the rinse aid dispenser
N.B.: Should any of the above situations result in a bad wash performance or insufficient
rinsing, remove dirt deposits from the dishes by hand since the final drying cycle hardens
the dirt, making it difficult to remove with a subsequent wash.
If the malfunction continues, contact the Technical Assistance Centre, quoting the model of
the dishwasher. This is found on the plate on the upper section of the inside of the
dishwasher door, or on the warranty. This information will make it possible to take quicker,
more effective action.
Except for the list of spare parts available on our website, under no circumstances should
you repair or attempt to repair the appliance yourself or have the appliance repaired by
inexperienced and / or unqualified persons. Repairs carried out by inexperienced and / or
unqualified persons can cause injury or serious malfunction of the equipment and damage
to property. It is advisable to contact our Authorized Technical Assistance Centres.
We recommend that you always use original spare parts, which can be obtained from our
customer service for a period of at least 10 years from the moment the appliance is put
into circulation within the European Economic Area.
From 1 March 2021, energy and environmental information relating to the energy labelling
of household appliances and the specifications for their eco-design are visible in Europe in
the product database (EPREL) at the following link https://eprel.ec.europa.eu/ or through
the QR code located on the energy label.
WARNING
The manufacturer cannot be held responsible for any damage to
things and people and / or for safety issues re
sulting from repairs
not carried out by an Authorized Technical Assistance Centre or by
a service provider authorised by the manufacturer in accordance
with company guidelines relating to the repair and maintenance of
its products. Any damage caused to the
product by unauthorized
personnel during a repair attempt will not be covered by the
conventional warranty.
Loading ...
Loading ...
Loading ...