Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE
Do not operate
with wet hands
keep away from water
Make sure the plug is
connected well
Keep away from
gasoline, alcohol,
aromatherapy oil
gasoline
alcohol
aromatherapy
oil
1. Before cleaning and maintaining this product, be sure to unplug the plug from
the power source, and only begin cleaning or maintenance after the electrical body
is completely cooled.
2. Do not use chemical solvents such as toluene, ammonia, or bleach which can damage,
discolor, and cause corrosion of the fan. Do not use hard brushes as it could scratch the
fan’s appearance. If there is dirt that is not easy to come off, it is recommended to clean
with a small amount of a neutral detergent such as Dawn dish soap or with warm water
and a soft rag. Make sure to wipe off any residual soap with a dry cloth or clean rag.
SAFETY ALERT
Note:
Read this manual carefully before use. The company reserves the right to interpret
the instructions. The appearance of the product shall be subject to the actual final
object. In case of product technology or software upgrade, a notice maybe given.
1. Transport
3. Usage
4. Warning ( if used improperly, electric shock, fire, personal injury
and other damage may occur.)
2.Power Adapter
· Before moving the fan, be sure to turn off the fan and unplug from the power source.
· Hold the fan base or handle firmly to avoid the fan falling and hurting anyone or anything.
· Before carrying out maintenance work or moving the fan, please disconnect the power
adapter from the AC power socket.
· Do not pinch, bend or twist the AC power cord excessively, otherwise the cord’s core
maybe exposed or broken.
· Do not use an inappropriate AC outlet.
· Do not use a power adapter provided by any other device with this fan.
· In order to avoid danger, if the power cord is damaged it must be replaced by
professionals authorized by the manufacturer.
SAFETY PRECAUTIONS
· Before use, please refer to the voltage and frequency showed on the fan’s specification
label to determine safe usage.
· Do not insert your fingers or other objects into the front or rear fan grill during use. To do
so is dangerous and should never be done.
· In case of abnormal sounds, peculiar smells, high temperature, irregular rotation of fan
and/or other abnormalities, please stop using the product immediately and contact the
manufacturer for next steps before using the fan again.
BASIC PARAMETERS
PRODUCT NAME: FOLDABLE FAN
RATED VOLTAGE: DC 12V
RATED CURRENT: 2.0A
NET WEIGHT: 2.6KG
PRODUCT SIZE: 11.65" L * 11.65" W * 21" ~ 31.25" H
PACKAGE SIZE: 13.2" L * 8" W * 12.8" H
DC Motor
Syn Motor
Battery
Power
Speed/Mode
Swing
Timing
Adapter
Board
Power
Adaptor
(DC 12V)
Display Board
IR Receiver
31.26”
21”
6.5”
11.65”
11.65”
11.65”
COMPOSITION OF HAZARDOUS SUBSTANCES
Shell
PCB
Power adapter
This form is prepared in accordance with SJ/T11364
O: Indicates that the content of the hazardous substance in all homogeneous materials of
the component is below the limit specified in GB/T26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous
material of the component exceeds the limit specified in GB/T26572 However, with the
existing technical conditions, it is extremely difficult to make the product parts completely
free of the above harmful substances. The design will be gradually improved with the
progress of technology.
The “ environmental protection service life " of this product is 10 years, and its logo is shown
in the left figure. It can only be used under the normal conditions described in this manual.
Package
Hardware
Part name
Hazardous substances
TROUBLESHOOTING
Fault symptom Fault reasons
The power outlet is dead
Dirty fan blades
The power cord is not
plugged in place
Fan does not operate
Noise during operation
Different socket
Plug into a live power outlet
Power cord is not
connected correctly
Use power adapter
matched with this machine
Loose motor blades
Motor failure
Contact Airdog for next steps
Remove the front grill cover and
tighten the fan blade and fixing cap
Remove the front grill cover
and clean the fan blade
No swing
Make sure Swing
function was selected
The correct function
key is not pressed
Fan blade stuck
The fan blade is stuck due
to a foreign substance
Turn off power, unplug from the power
source, and then remove the substance
The battery indicator
is not on
Battery failure
The battery is dead
Contact Airdog for next steps
Please use 12V/2A adapter
for charging
Solution
IMPORTANT:
Before cleaning the Fan blades or performing any maintenance /
troubleshooting on the fan, always make sure to 1st turn off the
power and unplug the power cord from the power source.
· Do not use this product in places that are unstable or places the fan could fall over.
Only use the fan on solid, stable and flat surfaces which the fan will remain in a safe
upright position during the entire duration of its use. Do not hold the fan off of the
ground while in use.
· Do not use this product in a place where objects nearby can fall over, or that the fan’s
wind could knock an object over or out of the object’s safe orientation prior to fan
wind hitting it.
· Do not use this product in hot and/or humid environments such as a bathroom.
· Do not use this product when the power cord is damaged or the power cord plug is
loose.
· Do not operate this product if either the front fan grill or rear fan grill is not fully and
properly secured. Never operate the fan without the front or rear fan grill fully and
safely covering the fan blades.
· Do not allow pets or children, including adults who do not understand this manual,
to operate this product.
· Do not replace the power cord without the manufacturer’s authorization; do not connect
the power cord halfway or use it with other electrical appliances.
· Do not place any part of the fan, including its power cord, nor operate the fan, near
any water.
· Do not disassemble, refit or repair internal components without the manufacturer’s
authorization.
· Do not climb on, sit on, or put bodyweight on this machine.
· Do not store in flammables and explosives around the fan body. Do not place the fan
near a heat source.
· Do not directly wash the fan body with water.
· Do not insert your fingers, body parts, clothing, or any foreign objects into the fan’s
front grill, rear grill, cover, or running fan blades.
· Do not put hair, clothing, fabric, etc. Near the fan to avoid being drawn in and
causing danger.
· Do not spray cleaning liquid or pesticide on the fan to avoid damaging the plastic
surface.
· Do not use outdoors.
· Do not let children or animals touch the fan, to avoid accidents.
· The company is not responsible for any injury caused by improper operation.
· When people leave the machine or when the machine is not in use, turn off the
power and unplug the power plug to avoid circuit failure and accidents.
CLEAN DISASSEMBLY METHOD
1. Complete machine: please take the complete machine out of the box and place it on
a clean and flat place to ensure that the machine will not be in danger of falling before
disassembly or assembly of other parts.
2. Disassembly of the front grill cover: Hold the frame of the fan firmly. Unscrew the fixing
screw of the grill cover group counterclockwise with a screwdriver. Rotate and open it
counterclockwise. Remove the front grill cover.
3. Fan blade removal: remove the fan blade nut clockwise and remove the fan blade.
10
IMPORTANT:
Make sure fan is not plugged and shut down in during assembly,
disassembly or cleaning.
Loading ...