Loading ...
Loading ...
Loading ...
6
ASSEMBLY INSTRUCTIONS
Step 1
Attach lid handle (1) to Drum lid (4) using two washers
(B) and two long bolts (D).
Attach Air Vent (2) and Air Vent bottom plate (3) to Drum
lid (4) using one bolt (H) and one washer (B) and wing
nut (E).
Step 2
Attach three upper support brackets (9) to the inside of
the upper drum section (7) using three screws (A) and
three wing nuts (E) in the top bracket holes.
Attach the two side handles (8) on the upper drum
section (7) using four screws (F) and four washers (B) on
the outside of the drum and four wing nuts (E) on the
inside.
Step 3
Attach three lower support brackets (11) to the inside
of the middle drum section using six screws (A) and six
wing nuts (C). Start with the bottom screw points rst as
your need to slot the upper support bracket (9) in behind
the lower support brackets and align the hole for the top
screw point.
Attach the two side handles on the middle drum section
using four screws and four washers on the outside of
the drum and four wing nuts on the inside.
Step 4
Assemble the re bowl by attaching the three legs (15) to
the Fire bowl (14) using 3 bolts (G) and 3 washers (B).
Loading ...
Loading ...
Loading ...