Loading ...
Loading ...
Loading ...
ELECTRIC DRYER ELECTRICAL REQUIREMENTS (CANADA ONLY)
Electrical Shock Hazard
Plug into a grounded 4 prong outlet.
Failure to do so can result in death or electrical shock.
it is your responsibility:
[] To contact a qualified electrical installer.
[] To be sure that the electrical connection is adequate
and in conformance with the Canadian Electrical Code,
C22.1 -latest edition and all local codes. A copy of the above
codes standard may be obtained from: Canadian Standards
Association, 178 Rexdale Blvd., Toronto, ON M9W 1 R3
CANADA.
[]
To supply the required 4 wire, single phase, 120/240 volt,
60 Hz., AC only electrical supply on a separate 30-amp circuit,
fused on both sides of the line. A time-delay fuse or circuit
breaker is recommended. Connect to an individual branch
circuit.
[] This dryer is equipped with a CSA International
Certified Power Cord intended to be plugged into
a standard 14-30R wall receptacle. The cord is
5 fl (1.52 m) in length. Be sure wall receptacle
is within reach of dryer's final location.
[] Do not use an extension cord.
If you are using a replacement power supply
cord, it is recommended that you use Power
Supply Cord Replacement Part Number
4-wire
receptacle
(t 4-30R)
9831317. For further information, please reference the service
numbers located in the "Assistance or Service" section.
GROUNDING INSTRUCTIONS
m For a grounded, cord-connected dryer:
This dryer must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
WARNING: improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative
or personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug provided with
the dryer: if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
SAVE THESE INSTRUCTIONS
12
Loading ...
Loading ...
Loading ...