Loading ...
Loading ...
Loading ...
- 13 -
TROUBLESHOOTING
THE PUMP IS NOT WORKING
1. Check the suction tubes to be sure they are airtight. The pump will not
pump if the suction tube allows air to enter. Thread sealing PTFE tape is
recommended during assembly.
2.Rinse pump with water or the appropriate solution in regards to what
was just pumped. Some chemicals may harden or cause the internal parts
to swell, this prohibits the operation of the pump. You may need to open
the pump body and clean the internal parts. While inside, visually review
the vane for chemical permeation or swelling. If this has occurred replace
the pump.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made in China
Loading ...
Loading ...