Loading ...
Loading ...
Loading ...
4, Plug the power cord into a 3-Prong, well grounded 120 volt
60 Hz approved electrical outlet protected by a 15-amp
fuse or comparable circuit breaker.
Your washer is grounded through the third prong of the
power cord when plugged into a three-prong grounded
receptacle.
5, Slide your washer into position.
6, Level your washer by turning the leveling legs in or out as
necessary by hand or by using the wrench included with
your washer.
When your washer is level, tighten the locking nuts using
the wrench or (-) flathead screwdriver.
®
Your Washer must be leveled on all four sides. A
carpenter's level should be used on all four corners of
your Washer. It's a good idea after the first dozen washes
to recheck your washer's levelness.
_ void damage to the legs. Do not move
the Washer unless the Locking-nuts are
fastened to the bottom of the Washer.
instNing your washer 17
WF520AB-02838A EN.indd 17 2010-03-24 &&t_._4:30:28
Loading ...
Loading ...
Loading ...