Loading ...
Loading ...
Loading ...
Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
3. Screw a 120V, 75W maximum, incandescent light bulb with
E26 base into the socket.
4. Replace the lens cover by squeezing the cover and inserting
the tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
WIRING DIAGRAM
SE116B I
LightSwitch
On- Off
/ \
BK
WH
\ /
/ \
MotorCharacteristics
PowerSupply 120VAC
Frequency 60 Hz
Amperage 0.9 +10%A
WattageRating 50 +10%Watts
MotorResistance
White- Red 22.3 +10%Ohms
White- Black 13.4 +10% Ohms
ZE
/
N
MotorSwitch
Low- Off- High
/
tq
BK
_c
_/
L
Ground
Screw
GND
11
Loading ...
Loading ...
Loading ...