Loading ...
Loading ...
Loading ...
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the front panel of the range
hood.
B C
A. Incandescent light housing and cover
B. Grease filter retainer
C. Grease filter
ContR,> S
Off
On@Off Low@ High
! !
! !
A. Fan speed switch
B. On/Off light switch
Operating the light
Press the light switch to the left to turn the light On.
Press the light switch to the right to turn the light Off.
Operating the fan
The fan has 2 speeds.
Press the fan switch to the left for Low speed.
Press the fan switch to the right for High speed.
Return the fan switch to the center to turn the fan Off.
RANGE HOOD CARE
IMPORTANT: Clean the hood and grease filters frequently
according to the following instructions. Replace the grease filter
before operating hood.
Exterior Surfaces:
IMPORTANT: Do not use soap-filled scouring pads, abrasive
cleaners, cooktop polishing creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use cleaners that
contain chlorine.
Cleaning Method:
• Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with a soft, lint-free cloth.
• Glass cleaner to remove fingerprints.
• For stainless steel models rub in the direction of the grain to
avoid scratching or damaging the surface.
• For stainless steel models, use Stainless Steel Cleaner /_
and Polish, Part Number 31462A (not included): See
the "Assistance or Service" section to order.
Metal Grease Filter
To Clean the Filter:
1. Remove the screw from the greasefilter retainer.
2. Turnthe grease filter retainerto releasethe filter.
/
/
//
A. Filter retainer
3. Wash the metal filter as needed in a dishwasher or hot
detergent solution.
To Replace the Filter:
1. To reinstall the filter, place the back edge of the filter into the
channel at the rear of the hood. Push the filter into place and
turn the filter retainer to secure the filter to the range hood.
2. Replace the screw in the grease filter retainer.
10
Loading ...
Loading ...
Loading ...