Loading ...
Loading ...
Loading ...
PREPARATION ▸ INSERTING/REMOVING THE MEMORY CARD
31
REMOVAL
▸ Turn the battery release lever
• Battery is pushing out slightly.
▸ Press down on the battery lightly
• The battery unlocks and pushes out fully.
▸ Remove the battery
Important
• Data is still being written to the memory card as long as the bottom
LED remains lit.
• Removing the battery while the camera is switched on may result
in the loss of custom settings or damage to the memory card.
INSERTING/REMOVING THE MEMORY CARD
The camera will save exposures to an SD (Secure Digital), SDHC
(High Capacity) or SDXC (eXtended Capacity) memory card.
Notes
• SD/SDHC/SDXC memory cards are available from various suppliers
in a range of sizes and with differing read/write speeds. Memory
cards with high storage capacities and high read/write speeds offer
quick storage and rendering.
• The memory card may not be supported (capacity) or will have
to be formated in the camera before first use (see p. 79). The
camera will in that case display a relevant message. Please see
the section “Technical Data” for information about supported
cards.
• Check the memory card for correct alignment if you are having
difficulties inserting it into the camera.
• See p. 10 and p. 13 for additional information.
Loading ...
Loading ...
Loading ...