Loading ...
Loading ...
Loading ...
Antelope Audio Zen Go Synergy Core User Manual
Page 67
Recording and monitoring Edge Duo as a single-membrane condenser mic
Route the ‘PREAMP’ input for Edge Duo to your desired outputs to monitor ‘dry’ audio and
record from Inputs 1 – 8 in your DAW (e.g. you are using Channel 1 in the mixer, so you are
recording from Input 1).
Recording and monitoring Edge Duo as a dual-membrane condenser mic
In this case, you will record and monitor two concurrent mono inputs, one coming from each
membrane. They will sound slightly different in tone and volume, due to the physical distance
between the membranes and the performer. You may have to compensate with individual gain
adjustments for each membrane.
Route the ‘PREAMP’ inputs occupied by Edge Duo to your desired outputs to monitor ‘dry’
audio and record from Inputs 1 – 8 in your DAW (e.g. you are using Channel 1 in the mixer, so
you are recording from Input 1).
Recording and monitoring Edge Duo as a modeling microphone
Make sure that ‘Edge Duo’ mic emulations are enabled. Route the ‘MIC EMU’ inputs
corresponding to the ‘PREAMP’ inputs occupied by Edge Duo to your desired outputs for
monitoring and record from Inputs 1 – 8 in your DAW (e.g. you are using Channel 1 in the mixer,
so you are recording from Input 1).
Recording and monitoring ‘dry’ and ‘mic emulation’ audio simultaneously
With the Edge Duo, monitoring and recording ‘dry’ and ‘mic emulation’ audio simultaneously
means handling four concurrent mono signals – two ‘dry’ tracks and two ‘mic emulation’
tracks. ‘Dry’ audio comes from the ‘PREAMP’ inputs, and ‘Mic Emulation’ audio comes from the
‘MIC EMU’ outputs. Route them anywhere you want and record from Inputs 1 – 8 in your DAW
(e.g. you are using Channel 1 in the mixer, so you are recording from Input 1).
For more information about Edge Duo, visit its
product page.
Loading ...
Loading ...
Loading ...