Loading ...
Loading ...
Loading ...
12
Turn the water supply tap on completely.
Make sure the safety lock is down and in its original position
(Fig.9) , then press the trigger for a few seconds until water flow
is steady. This will allow air to escape and discharge any
residual
pressure in the hose.
Turn the ON/OFF switch to the ON position to start the pressure
washer(Fig.10) .
When re-starting the motor, always keep the trigger pressed.
NOTE: The motor only runs when the trigger is operated and shuts off when the trigger is released.
USING NOZZLES
Before beginning any cleaning task, determine the best nozzle for the job. Each of the nozzles has
a different spray pattern.
This electric pressure washer is equipped with five (5) Quick-Connect nozzles that easily snap onto the
Quick-Connect collar of the spray wand. The nozzle patterns are 40˚ (for gentle cleaning), 25˚ (for
all-purpose cleaning), 15˚ (for tough jobs), 0˚ (for spot cleaning or hard-to-reach areas) and the
Soap nozzle (for detergent application).
CAUTION: NEVER change nozzles without locking the safety lock on the trigger handle.
WARNING:High-pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons, pets, live electrical equipment, or the appliance itself.
To connect a nozzle to the spray wand
Turn off the pressure washer and shut off the water supply.
Pull the trigger to release water pressure.
Engage the safety lock on the trigger handle .
Snap the desired nozzle onto the Quick-Connect collar until
it
clicks into place (Fig.11).
Loading ...
Loading ...
Loading ...