Loading ...
Loading ...
Loading ...
3. Using Your Camera
25
2.4
To Lock the Battery Door
1. Press the battery door down firmly until it is completely flat.
2. While the battery door is pressed down, slide the door to the closed position,
the battery door is fully locked once the latch clicks into place.
2.5
Charging the Battery
Connect your camera to the included AC adaptor with the USB cable
provided for charging. Insert the small end of the USB plug into the camera’s
port under the battery door, and the larger end in to the included AC adaptor.
While charging the LED indicator light will light up solid green, when finished
charging the light will turn off.
2.6
Powering the Camera On/Off
Press the POWER button to power the camera on. To power the camera off,
press the POWER button.
If the camera’s battery is low, a “Low Power” message will display on the
screen and it will automatically shut down within a few seconds to prevent
memory corruption or loss.
2.7
Switching Modes
Press the MODE button to cycle between Photo, Video and Audio
Recording Modes. The corresponding mode will be displayed in the top
left corner of the screen. Press the PLAYBACK button to access playback
mode.
2.8
Connecting to a Computer
Your camera can connect to a computer to transfer photo and video files for
viewing and editing, as shown below. Once connected and powered on, the
camera’s screen will enter “Mass Storage” mode automatically.
Loading ...
Loading ...
Loading ...