Lexmark CS417DN User's Guide PDF Lexmark CS410, CS417

Loading ...

All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable

results if third-party supplies or parts are used. Imaging component usage beyond the intended life may

damage your Lexmark printer or its associated components.

Warning—Potential Damage: Use of third-party supplies or parts can aect warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your

printer, press

and on the control panel simultaneously for 15 seconds to clear the message and

continue printing.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and

install a genuine Lexmark supply or part.

Note: For the list of supported supplies, see the “Ordering supplies” section or go to

www.lexmark.com.

Printer had to restart. Last job may be incomplete.

From the printer control panel, press to clear the message and continue printing.

For more information, go to

http://support.lexmark.com or contact customer support.

Reinstall missing or unresponsive [color] cartridge [31.xy]

Try one or more of the following:

• Install the missing toner cartridge. For more information, see the “Replacing supplies” section of the

User’s Guide.

• Remove the unresponsive cartridge, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the cartridge may be defective.

Replace the cartridge.

Reinstall missing or unresponsive black and color imaging kit and all

cartridges [31.xy]

Try one or more of the following:

• Check if the imaging kit is missing. If missing, then install the imaging kit.

For information on installing the imaging kit, see the “Replacing supplies” section.

• If the imaging kit is installed, then remove and reinstall the unresponsive imaging kit.

Note: If the message appears after reinstalling the supply, then replace the imaging kit. The imaging

kit may be defective or a non‑genuine Lexmark supply. For more information, see

“Using genuine

Lexmark parts and supplies” on page 110.

Troubleshooting 152

Loading ...

Lexmark CS417DN