Loading ...
Loading ...
Loading ...
moving money forward
This function is available by pressing the BATCH button. When the BATCH function is active, the batch size is
displayed on the home screen.
The BATCH function is used to specify a target output number of bills. The machine will then run until the target
number of bills is reached in the stacker (even if there are remaining bills in the hopper), then stop and display
a “BATCH COMPLETE” message alongside the number of bills counted. When the stacker is emptied, the
machine will automatically resume counting for another batch. If the hopper runs out of bills before a batch
is completed, the machine will display “BATCH INCOMPLETE”. The user may then add bills to the hopper to
complete the batch or remove the incomplete batch from the stacker. To set the desired target batch number,
press the BATCH button repeatedly to cycle through different presets (100, 50, 20, 10) or use the “arrow up”
and “arrow down” buttons for interim adjustment.
To disable the BATCH function, press the BATCH button repeatedly until “BATCH” disappears on the screen.
3.10 Batch Function
16
This function is available by pressing the ADD button. When the ADD function is activated, “ADD” will be
displayed on the home screen.
In this function, the machine will count multiple stacks of bills while keeping track of the total amount and value
of bills counted. To utilize the ADD function, load the first stack of bills into the hopper and run the machine as
usual. The number and value of the bills will be displayed on the screen. Empty the stacker and add the new
stack into the hopper. The machine will continue counting and adding the new values to the totals. Note that
the Cassida 9900R will memorize and resume the status of the ADD function when turned off.
To disable the ADD function, press the ADD button again.
3.9 Add Function
Loading ...
Loading ...
Loading ...