Loading ...
Loading ...
Loading ...
15. MP3Control
a. Selected songs/Play/Pause: When playing music, rotate to change up/down the
song, press to pause/play.
b. Recording: When playing music, press and hold to record, short press to nish
recording and enter playing of the recording music. When playing the recording music,
short press to switch to play the USB music, play from the rst USB music. When playing
the USB music, short press to switch to play the recording music, play from rst
recording music.
c. Mode/Repeat: Short press to switch USB and Wireless BT mode, press and hold to
repeat the playing song. When playing the repeated song, press and hold to return to
normal play.
16. USB Jack: Used by U-Disk or computer software for playing and recording.
17. MP3 Play Window: Shows the Mp3 playing, time, song name and other play instruction.
18. +48V PHANTOM Power: This switch toggles phantom power on and o. When the switch
is on the mixer supplies +48V phantom power to all channels that have XLR mic input
jacks. Turn this switch on when using one or more phantom-powered condenser micro
phones.
19. +48V Indicator: This indicator lights up when the
+48V power is ON.
20. POWER Indicator: This indicator lights up when
the mixer's power is ON.
21. MP3 EQ player: The two-band equalizer adjusts
the level of the two bands Mp3 player.
22. Level Meter: Shows the level of strong signal.
23. AUX1 Level Control: This control adjusts the
signal level from the [AUX1] output jack
(refer to numaral 36 in Section MAIN TERMINALS
on page 10).
24. AUX2 Level Control: This control adjusts the
signal level from the [AUX2] output jack (refer to numeral 35 in Section MAIN TERMINALS
on page 10).
25. RETURNS Control: Adjusts the level at which the signal received at the RETURN jacks
(L (MONO) and R) is sent to the STEREO L/R bus.
26. PHONES Control: Controls the level of the signal output to the PHONES jack OUT jacks.
27. PHONES Jacks: Connect a pair of headphones to this TRS phone-type output jack.
28. FX SEND Fader: Control eect input signal level.
29. MP3 VOL Fader: Change VOL button can be control the VOL of Mp3.
30. MAIN MIX Fader: You use the high-precision quality faders to control the output level of
the main mix.
31. POWER Switch: Use the POWER switch to turn on the mixing console. The POWER switch
should always be in the "OFF" position when you are about to connect your unit to the
mains. To disconnect the unit from the mains, pull out the main cord plug. When installing
the product, ensure that the plug Is easily accessible.
www.PyleUSA.com
13
www.PyleUSA.com
14
5. PEAK LED: The PEAK-LED lights up when the input signal is driven too
high. lf this happens, back o the TRIM control and, if necessary, check
the selling of the channel EQ.
6. PAN Control: The PAN control determines the position of the channel
signal within the stereo image. When working with subgroups, you can
use the PAN control to assign the signal to just one output, which gives
you additional exibility in recording situations.
7. PFL SWITCH: The PFL switch is used to route the channel signal to the
PFL bus (Pre Fader Listen). This enables you to listen to a channel signal
without aecting the main output signal. The signal you hear is taken
either before the pan control (PFL, mono)
8. MUTE SWITCH: The MUTE switch breaks the signal path pre-channel
fader, hence muting that channel in the main mix. The aux sends which
are set to post-fader are likewise muted for thaichannel, while the pre-
fader monitor paths remain active irrespective of whether the channel is
muted or not.
9. CHANNEL FADER: Adjusts the level If the channel signaL. Use these
faders to adjust the balance between the various channels.
10. EFFECTOR Display: Show the kind of eector.
11. PROGRAM Control: You can select the
eect preset by turning the PROGRAM
control. The display ashes with the number
of the current preset. To recall the selected
preset, press on the button; the ashing
slops. You can also recall the selected
preset with the foot switch.
12. FX Control: Used to adjust size eect.
13. PARAMETER Control: Used to adjust the
depth of the selected eect, speed, etc
14. ST GRAPHIC EQUALIZER: This 7-band
equalizer adjusts the sound of the signal
send to The MAIN OUT jacks.
Loading ...
Loading ...
Loading ...