Loading ...
Loading ...
Loading ...
Control locations of the gas surface burners
Your range is equipped with gas surface burners with
different BTU ratings. The ability to heat food quicker and in
larger volumes increases as the burner size increases.
• The small simmer burner is best used for simmering
delicate sauces, etc. This burner is located at the right
rear burner position on the cooktop.
• The standard burner can be used for most surface
cooking needs. The standard burners are located at the
left front and left rear positions on the cooktop.
The power burners are best used for bringing large
quantities of liquid rapidly up to temperature or when
preparing larger quantities of food. The POWER burner
is located at the right front position on the cooktop.
Regardless of size, always select cookware that is
suitable for the amount and type of food being
prepared. Select a burner and flame size appropriate to
the pan. Never allow flames to extend beyond the outer
edge of the pan.
Figure 1:
Burner cap
I
Burner cap lip
urner head
Burner cap and burner head
Assembly of the burner caps and burner grates
It is very important to make sure that all of the surface
burner caps and surface burner grates are installed
correctly and at the correct locations.
1. Remove all packing material from cooktop area.
2. Discard all packing material (if applicable).
3. Unpack burner grates and position on the cooktop.
On round style burners, the burner cap lip (Figure 1) should
fit snug into the center of burner head and rest level. Refer
to Figure 2 for correct and incorrect burner cap placement.
Once in place, you may check the fit by gently sliding the
burner cap from side to side (Figure 3) to be sure it is
centered and firmly seated. When the burner cap lip makes
contact inside the center of the burner head you will be able
to hear the burner cap click.
Correct burner cap
placement
Incorrect burner cap
placement
Figure 2: Proper burner cap placement
Figure 3: Gently move cap for proper placement
Loading ...
Loading ...
Loading ...