Loading ...
Loading ...
Loading ...
8
ENG
Four Button Touch Control*
Screenless Touch Control*
ON/OFF Button Plus Button Timer Minus Button Lamp
• ON&OFF: Starts the motor.
• Speed +: Increase the speed of the motor. Max: 3 speed.
• Speed -: Decrease the speed of the motor. Max: 1 speed.
• Lamp: Turns the lamp on. When the lamp is on, the dot segment is viewed on the screen.
• Timer: If the lamp button is pressed for 3 seconds, the device starts flashing in respective speed. After 15
minutes the device is turned off.
• Air Cleaning: When the air cleaning button is pressed on the Remote Control, the function is initiated. The
motor is operated for 10 minutes in 1 speed, then switches to standby for 50 minutes. While this function is
active, the screen segments start rotating. Then the system shuts down automatically. The rotation is only for 24
hours.
• Filter Warning: At the end of 100 hours of operation, the ‘C’ warning is viewed on the screen. This warning can
be deleted by pressing the speed - button for 5 seconds, the ‘E’ is viewed on the screen, the warning is deleted
and the timer is reset. This warning is viewed for 2 seconds when on/off button is pressed. During rotation
changes this warning is not displayed.
• Automatic Shutdown: For safety purposes, the circuit board of the motor is programmed to provide maximum
of 5 hours lighting and maximum 10 hours of operation. When the air cleaning function is in effect, the motor
shutdown feature is turned off.
• ON&OFF Button: Starts the engine.
• Timer: To activate, press and hold the ON / OFF for 3 seconds. Operating duration is 15 minutes at the adjusted
cycle. The appliance shuts down at the end of this duration. During the operation, the activated engine LED
flashes.
• Air Cleaning: To activate the function, press the air cleaning button on the remote control. On cycle 1, the
engine operates for 10 minutes and then stays on stand by mode for 50 minutes. This cycle continues for 24
hours.
When this function is active, the engine ON / OFF button LED flashes. Then the system automatically shuts
down. The cycle runs only for 24 hours.
• Light ON / OFF Button: Turns the light on and off. When the light is on, the first LED is activated.
1. Receiver
2. ON / OFF Button
3. Light
4. LED
5. Speed Adjustment Button
Loading ...
Loading ...
Loading ...