Loading ...
P/N A23057901 210927
2. Use Phillips screwdriver to install two shoulder
screws (E) in the upper rear holes. Turn until
shoulder screws are in firm contact with freezer
wall. (See Figure 1).
7. Insert and tighten screw (F) in outermost hole on
bracket to fasten it to the upper side of freezer
wall. (See Figure 3).
Figure 1
Figure 3
Figure 2
8. Follow steps in Use & Care Manual to reinstall
door and add baskets.
9. Put Ice Bucket (C) on basket as shown in Figure 4.
Automatic Ice Maker Installation
1. Unplug refrigerator from electrical outlet.
NOTE
We recommend the freezer door and freezer
baskets be removed before proceeding with the
installation. Please refer to ‘Removing Freezer
Drawer’ in the “Removing the Doors” section and
‘Freezer Features’ in the “Storage Features” section
in the Use & Care Manual.
Figure 4
3. Remove the connector cover.
4. Plug the ice maker connector into the connector
in the freezer compartment.
5. Hang the ice maker and bracket assembly loosely
on the shoulder screws using the keyhole slots in
the bracket.
6. Push the Ice Maker and bracket assembly toward
the rear of the freezer compartment to seat the
keyhole slots firmly onto the shoulder screws (See
Figure 2).
NOTE
Verify the switch is in the ON position.
E
F
E
Connector Cover
C
Switch
E
E
Connector
Loading ...
Loading ...