Loading ...
Loading ...
Loading ...
9
Electrical Shock Hazard
Disconnect power before servicing
• In case of a direct connection to the house wiring is
preferred, do the following:
• Disconnect the power.
• Cut off the plug from the power cord.
• Connect the wires from the power cord to the
wires from the house wiring using UL listed
wire connectors.
• Store the excess wires in the wiring box.
• Reconnect the power.
Installing the Baffle Filters
• Peel off the protective film from the baffle filters if
there's any:
• Soak the Baffle Filters into hot waters or use
heated air from a hair dryer to soften the films.
• Peel off the films from the corner.
• Align the baffle filters with the Hood Unit and install
them from left to right.
Completing the Installation
Turn power ON in the control panel. Check all lights and
fan operations.
INSTALLATION
Loading ...
Loading ...
Loading ...