Loading ...
Loading ...
Loading ...
QUICK REFERENCE
• Before attaching (or detaching) the stand, unplug the AC
cord from the AC iNPUT terminal.
• Before performing work spread cushioning over the base
area to lay the TV on This will prevent it from being
damaged
• Attach the stand in the correct direction.
• Do not remove the stand from the _/unless using an
optional wall mount bracket to mount it.
Be sure to follow the instructions, incorrect installation
of the stand may result in tbe 1]/falling over,
I Confirm that there are 8 screws (4 short screws
and 4 long screws) and a hex key supplied with the
stand unit.
tiff
2 Altach the supporting post for the stand unit onto
the base using the box for the stand unit as shown
below.
• The supporting post altaches to thebase atan oft centered
location onthe base Besureto attach the supporling post in
1hedirection indicated below andaltach the stand tothe TV
with the wider side of1hebase facingtor_sard
II TI _L°ng ....... Hexkey
Forwarded,/
:3 1"_Insert the stand into the openings on the bottom
of the TV.
"2' Insert and tighten the 4 short screws into the 4
holes on the rear of the TV.
"r Softcushion _,__",
• ,,
• To detach the stand, perform the steps in reverse order
"- o |-" _| I_ A °
= This _ sbould be mounted on tbe wall only with the
AN-52AG4 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
installing the TV requires special skill that should
only be performed by qualified service personnel
Customers should not attempt to do the work
themselves. SHARP bears no responsibility for
improper mounting or mounting that results in
accident or injury.
Using an optional bracket to mount the TV
• You carl ask a qua<lified service professional about
using an optional AN 52AG4 bracket to mount the TV
to the wall.
• Carefully read the instructions that come with the
bracket before beginning work.
f
Hanging on the wall
AN 52AG4 wall mount bracket.
See the bracket instructions for details.)
Vertical mounting Angular mounting
About setting the ]_/angle
015710/15120<
• The center of the display:
6 3A inches (174.25 ram)
under the "A" position.
Refer to the operation
manual of AN 52AG4 for
details.
• Detach the cable clamp on the rear of the TV when using
the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at
the 4 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the
bracket to the rear of the %/
Loading ...
Loading ...
Loading ...