Loading ...
Loading ...
Loading ...
On-Screen Display Menu
Power control setting allows you to save energy.
Example I _ PowerControl
1 Press MENU to display the MENU screen, and then
press _/_, to select "Power Control".
2 Press A/_' to select a "No Signal Off" or "No
Operation Off", and then press ENTER.
3 Press _/_- to select "Enable", and then press
ENTER.
4 Press MENU to exR.
When set to"Enable", the power wHI automatically shut
down r_there is no signal for 15 minutes.
Five minutes before the power shuts down, the remaining
time displays every minute.
"Disable" is the factory preset value.
When a TV program finishes, this function may not operate
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
• Five minutes before the power shuts down, the remaining
time displays every minute
• "Disable" is the factory preset value
Example
[ _ Setup
1 Press MENU to display the MENU screen, and then
press 4/_ to select "Setup".
2 Press A/_' to select a specific adjustment item,
and then press ENTER.
• When you select "EZ Setup", "OH Setup", "Parental
CTRL" and "Reset", you can enter the 4 digit secret
number here See page 21 for setting a secret number.
3 Press A/_' (or 4/_)to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can run EZ Setup again, even alter setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish)¸
TV Location: Select "Home" or "Store" for the location
where you plan to install the %/
Ifyou select"Home",AV MODEis set to "STANDARD"
Ifyou select"Store", AVMODE is setto "DYNAMIC(Fixed)"
Incase no remotecontrol signalis receivedwithin 30
minutes, AVMODE will changeto "DYNAMIC(Fixed)"
automatica%
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable"
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area¸
See "Initial Setup" on page 11 for setting each item.
If no channel isfound, confirm the type of connection made
with your TV and try E7 Setup again¸
Ifyou select "Analog Search Start" and initiate the channel
search, the OH Memory for Cable Digitalwill be deleted
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable"
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area
CH Memory: You can sdect the channels to skip ineach
ANALOG (Air),ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable)
On:Skips channels [Channelselection disabledusing ON
A/V)
Off: Doesnot skipchannels (Channelselection enabledusing
CHA/V)
See "Initial Setup" on page 11 for setting each item.
If no channel isfound, confirm the type of connection made
with your TV and try channel search again.
Ifyou select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digitalwill be deleted.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel
Make sure the signal isstrong enough for each
channel
Thisfunction isavailablefor DIGITAL(AIr)only
19
Loading ...
Loading ...
Loading ...