Loading ...
Loading ...
Loading ...
10 CONTENTS
Converting your appliance for use with LPG
The appliance is preset for natural gas use but can be
converted for use with LPG.
A conversion kit is included with the product for universal
LPG usage. The kit contains an injector and LPG sticker.
Please follow the procedure below if a conversion to suit
UNIVERSAL LPG is required:
A. Convert the pressure regulator for use with LPG
1. Unscrew the top hat nut from the regulator. The top
hat nut and control pressure spring assembly will
disengage as an assembly.
2. Unscrew the threaded pin from top hat.
3 Upturn threaded pin, so spring is free and screw pin
back into the top hat until firm.
4. Refit the top hat nut assembly to the regulator
ensuring that it is fully screwed down. The regulator is
now set for connection to LPG.
1.
2.
3. 4.
B. Change oven injector to LPG
1. Remove the oven door. Refer to the “Cleaning your
appliance” section.
2. Remove the screw from the Burner Cover then
remove the Burner Cover.
3. Remove the four screws holding the Burner (marked
‘x’ in diagram) and carefully remove it from the oven
cavity while leaving the ignition bracket connected.
4. Remove the three screws from the Aeration Plate
(marked ‘y’ in diagram) and carefully remove it from
the oven cavity while leaving the ignition bracket
connected.
5. Using a 7mm (9/32”) socket, remove the injector and
replace it with the supplied LPG injector.
GAS INSTALLATION INFORMATION (CONTINUED)
6. Install all the removed parts in the reverse order of
disassembly.
7. Attach the supplied LPG sticker to the cooker, near
the gas supply inlet. Cover the Natural Gas label that
is factory fitted.
NOTE: While re-installing Burner, make sure to install it in
the right position (with injector and locating pins fitted to
the Burner).
y
y
x
x
x
x
y
Oven Cavity
Burner Cover
Aeration Plate
Ignition Bracket
Injector
Burner Assembly
Loading ...
Loading ...
Loading ...