Loading ...
Loading ...
Loading ...
ENGLISH
4
Fig. I
4
For a More Thorough Cleaning (Fig.J,K1, K2)
NOTE: Either a bag filter
7
or a pleated filter
8
will work
with these vacuums.
• Figure H - Press the dust bowl release button
2
on the
handle and remove the dust bowl.
• Remove filter from within the bowl.
Fig. J
7
8
• Shake or lightly brush any loose dust off filter.
NOTE: The brush on the nozzle can be used to remove dirt
on the filter.
Bag Filter and Pre-Filter (Fig. K1, K2)
The bag filter and pre-filter can be separated to allow for
better cleaning.
Twist the bag filter to separate it from the pre-filter.
Fig. K1
• The dust bowl
4
and filters can be washed in warm soapy
water. Allow to dry before placing back into the vac.
USE
Switching On and Off (Fig. G)
• Figure F - To start, slide the On/Off switch
1
forward
(i.e. “O”= Off, “I” = On).
• To stop, slide the switch back.
• Return the product to the charger immediately after use
so that it will be ready and fully charged for the next
use. Ensure that the product is fully engaged with the
charger plug.
1
Fig. G
Cleaning and Emptying the Product
WARNING: Projectile/Respiratory Hazard:
Never use the vac without its filter.
NOTE: The filter is re-usable; do not confuse it with a
disposable dust bag, and do not throw it away when the
product is emptied. We recommend that you replace the
filter every 6–9 months depending on frequency of use.
There are two methods of cleaning the bowl, a quick empty
method and a thorough clean method.
For a Quick Empty (Fig. H, I)
• Figure H - Press the dust bowl release button
2
on the
handle and remove the dust bowl.
Fig. H
2
• The top of the bowl is open when the bowl is removed
so that dust can be easily emptied without touching
the filter.
• Figure I - Empty the dust from the bowl
4
.
• To replace the dust bowl, place it back onto the handle
until it
“clicks” firmly into position.
For a more thorough cleaning, remove bowl as described below.
Loading ...
Loading ...
Loading ...