Loading ...
Loading ...
Loading ...
28
HOW TO USE THE SOUND SYSTEM
You can use any Bluetooth-enabled personal audio
device to play music or audio books through the
console sound system while you exercise.
1. Make sure your device’s Bluetooth setting
is turned on, and place or hold it near the
console.
2. Press and hold the Bluetooth
Audio button on the
console’s speaker grill for 3
seconds.
A tone will sound and the Bluetooth button will
begin flashing to indicate that the console has
entered pairing mode.
3. Pair your device to the console.
Once your device and the console pair success-
fully, the audio from your device will play through
the console’s speakers.
Note: The console can save eight devices in its
memory. If you have previously paired your device
to the console, you can simply press the Bluetooth
Audio button to connect your device to the console.
4. Adjust the volume as desired.
You can adjust the
volume level using
the volume buttons
on the console or the
volume control on your
personal audio device.
5. Erase the console’s device memory if
necessary.
If you need to erase all the Bluetooth-enabled
devices saved in the console’s memory, press and
hold the Bluetooth Audio button for 10 seconds.
HOW TO ADJUST THE CUSHIONS
The treadmill features a cushioning system that
reduces the impact as you walk or run on the treadmill.
To adjust the cushions, fi rst remove the key from the
console and unplug the power cord. You may also
need to place the treadmill in the storage position (see
HOW TO FOLD THE TREADMILL on page 30).
For a more fi rm walking platform, turn a cushion to
the position shown in drawing 1; for a less fi rm walk-
ing platform, turn the cushion to the position shown in
drawing 2. Adjust the other cushions in the same way.
Note: Make sure that the cushions on the left and
right sides of the treadmill are set to the same firm-
ness level. The faster you run on the treadmill, or
the more you weigh, the firmer the walking plat-
form should be.
More firm Less firm
12
Loading ...
Loading ...
Loading ...