Loading ...
Loading ...
Loading ...
JET
11
Problem Possible cause Remedy
Gun leaks from fluid
nozzle.
Foreign substances between
fluid nozzle and needle.
Disassemble and clean nozzle and
needle.
Paint emerges from needle
packing.
Needle packing is damaged or
missing.
Replace packing.
Too much overspray. Gun too far away. Move gun closer to work surface.
Excessive fluid. Reduce fluid flow.
Excessive air pressure. Reduce air flow.
Nozzle too large for project. Try smaller nozzle kit.
“Orange peel” finish
(textured instead of
smooth).
Insufficient air pressure for
proper atomization.
Increase air flow.
Fluid too thick. Thin the fluid and retry.
Applying fluid at an angle. Apply perpendicular to work
surface.
Spray nozzle applications
Below are general applications for accessory nozzles available for this spray gun. This is only a general
guide; consult the fluid material manufacturer for more information on efficient use of their product.
Nozzle size
General application
mm inch
1.3 0.05 clearcoats, water-based and single stage paints
1.4 0.055 basecoats, thicker clearcoats, single stage urethanes
1.7 0.066 primers; upper level for urethanes, lower level for polyurethanes
2.1 0.083 heavy-bodied primers
Replacement parts
Service parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Please have the stock number and serial
number of your tool available when you call, so that we may serve you quickly and accurately.
Loading ...
Loading ...
Loading ...