Loading ...
Loading ...
Loading ...
16 OPERATING FOR THE FIRST TIME
Choosing utensils for electric hotplates
Refer to the diagram below.
Good
Bad
(recessed base)
Bad
(convex base)
Bad
(undersize)
Bad
(oversize)
Bad
(moisture on hotplate)
Bad
(no cookware)
Choosing utensils for gas hotplates
Refer to the diagram below.
Good
Bad
(undersize)
Bad
(oversize)
Do not use utensils which are too large or too small.
Installation and service warning
WARNING
• Only an authorised person must install and service
this appliance (Certificate of Compliance to be
retained).
• In order to avoid a hazard, the installation
instructions
MUST be followed.
• In order to avoid the appliance tipping, the anti-tilt
plate MUST be installed.
• Appliances requiring connection to 230 – 240V
MUST be earthed.
• An authorised person should inspect this appliance
every 5 years.
• This appliance must NOT be installed on a base,
box or in a closed cupboard.
• If the electrical supply cord is damaged, a qualified
person MUST replace the cord to avoid a hazard.
WARNING
Surrounding kitchen cabinets MUST WITHSTAND 85°C.
BEFORE OPERATING FIRST TIME
1. Read all the Warning and Safety information.
2. Remove all internal boxes and bags from oven.
3. Clean out the oven interior with detergent and warm
water and polish with a soft cloth. DO NOT close
oven door until the oven is completely dry.
OPERATING FOR THE FIRST TIME
Loading ...
Loading ...
Loading ...