Loading ...
Loading ...
Loading ...
113
FlexFit Pro
ENGLISHSECTION E
NOTE: The display backlight must be illumi-nated before proceeding. To turn the back-light on, press any key (MODE, FAN, , TIME, or SET) located at the bottom of the display, or press the ON/OFF key located at the top of the display.Timer ONPress the TIMER key once, the ON timer icon will appear in the upper right corner of the screen. The ON icon and hour posi- keys to set the hour. Press the TIMER key again, the ON icon and minutes position are keys to set the minutes. Press the Timer OFFPress the TIMER key 3 times, the OFF timer icon will appear in the upper right corner of the screen. The OFF icon and hour keys to set the hour. Press the TIMER key again, the OFF icon and minutes position keys to set the minutes. Press Timer ON/OFFPress the TIMER key 5 times, the ON/OFF timer icon will ap-pear in the upper right corner of the screen. The ON icon and keys to set the hour. Press the TIMER key again, the ON icon and minutes position keys to set the minutes. Press the TIMER key again, the OFF icon and hour position are now keys to set the hour. Press the TIMER Press the keys to set the minutes. Press the SET key to ON) and adjusts the arrow direction accordingly. If neither key is pressed within 10 seconds, or if the MODE, FAN, or ON/OFF keys are pressed prior to pressing the SET key, the setting function is canceled and reverts back to the previous setting.Timer CancelPress the TIME key up to 9 times to cycle through the timer settings. When the timer icon disappears, the timer function is canceled.Note: An active timer function will remain displayed on screen until the set time has been reached and command completed. Timer Function SettingWIRED CONTROLLER OPERATIONSettings & FunctionsPress the SET key. The swing louver function icon will be displayed. Press the keys to advance through the functions to select ECO function. (The icon will icon will remain on.To cancel ECO function, repeat the above steps.NOTE: The energy saving default parameters are listed below:74°F Lowest temperature limit of Cooling and Dry mode.78°F Highest temperature limit of Heating mode.74°F – 86°F Temperature adjustment range in Cooling and Dry mode. 60°F – 78°F Temperature adjustment range in Heating mode.ECOFor CoolingUnder Cooling mode, set the temperature to 86°F. Press and hold the FAN key for 5 seconds. The Cooling ECO param-screen. Default temperature is 74°F. Press the keys to adjust the lowest target cooling temperature. Press the SET For HeatingUnder Heating mode, set the temperature to 60°F. Press and hold the FAN key for 5 seconds. The Heating ECO parameter screen. Default temperature is 78°F. Press the keys to adjust the highest target heating temperature. Press the SET Press and hold the SET and FAN keys for 5 seconds. The cur-rent static pressure will be displayed in the upper right corner Press the TIME key to shift the unit no. displayed in the upper left corner of the screen. The unit numbers are from 00-15.Press the keys to change the static pressure grade, shown in the upper right corner of the screen.setting. Press the MODE, FAN, or ON/OFF key to exit the function. If no key is pressed in 10 seconds, the function will also exit. NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. NOTE: This function requires the ON/OFF key LED to be turned ON and the screen backlight to be illuminated. ECO Energy Saving FunctionECO Parameter SettingStatic Pressure Grade Inquiry & Adjustment
Loading ...
Loading ...
Loading ...