Loading ...
Loading ...
Loading ...
10
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION OF THE ELLIPTICAL
CLIMBER
Adjust the tension of the elliptical climber by rotating the
Tension Control Knob (No. C06) clockwise to increase
the level of resistance. Rotate the Tension Control
Knob (No. C06) counter-clockwise to decrease the level
of resistance.
Tension levels are set at Level 1 being the lowest and
Level 8 being the highest.
ADJUSTING THE BALANCE OF THE ELLIPTICAL
CLIMBER
If you find that the elliptical climber is unbalance
d and
causes
excessive movement when in use, you can
adjust the elliptical climber balance. Use the Spanner
(No. B10) to loosen the Nut (No. D34). Adjust the Foot
Pad (No. C22) on the Front & Rear Stabilizers (No.
A11 & No. A12) of each side if needed. After adjusting,
tighten and secure with the Spanner (No. B10).
MOVING THE ELLIPTICAL CLIMBER
To move the elliptical climber, hold the Left Handlebar
(No. A09) and Right Handlebar (No. A10) and tilt it
until the Transportation Wheel (No. C21)
touch the
ground. With the wheels on the ground, you can
transport it to the desired location with ease.
CLEANING
The elliptical climber
can be cleaned with a soft, clean, and damp cloth. Do not use abrasives
or solvents on plastic parts. Please wipe your perspiration off the elliptical climber
after each
use. Be careful not to get excessive moisture on the computer
display panel as this might
cause an electrical hazard or computer failure.
Please keep the elliptical climber
, especially the computer, out of direct sunlight to prevent
screen damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every week.
STORAGE
Store the elliptical climber in a clean and dry environment away from children.
Loading ...
Loading ...
Loading ...