Loading ...
Loading ...
Loading ...
6
Robert Bosch Hausgeräte GmbH
en
Fill quantity
The appliance ships with a preset ll
quantity of 250 ml. You can change this
quantity.
To adjust the ll quantity, proceed as
follows:
►
Hold down the temp. set button for at
least 5 seconds.
►
The indicator for the currently set ll
quantity ashes.
►
Press the temp. set button to select the
desired ll quantity:
L
= approx. 120 ml
70 °C = approx. 150 ml
80 °C = approx. 200 ml
90 °C = approx. 250 ml
Q
= approx. 300 ml
►
Press the start/stop button – the setting
is now stored.
Important: To keep the dispensed water
from overowing, make sure that you place
a sufciently large glass or cup under the
water outlet.
Note: To change this setting at any time,
repeat the above procedure.
Child lock
For safety reasons, this appliance is
equipped with a child lock. To activate it,
proceed as follows:
►
Press and hold the temp. set and start/
stop buttons simultaneously for at least
5 seconds. The
L
and
P
icons light up .
Info: When the child lock is activated, only
ambient water is available. When you press
the temp. set button, the
L
ashes; all
other settings are blocked.
To deactivate the child lock, proceed as
follows:
►
Press and hold the temp. set and start/
stop buttons simultaneously for at least
5 seconds. The
P
icon goes out.
BRITA MAXTRA water
lter system
In models equipped with a water lter
system, only BRITA MAXTRA water
lter cartridges may be used.
BRITA MAXTRA cartridges can be
purchased from retailers or directly from
Bosch Customer Service. (See the back
pages of these instructions for contact
information).
The appliance can be used with or without
a lter cartridge.
Keep in mind that you will enjoy the bene-
ts of BRITA ltration only if a MAXTRA
lter cartridge is installed in the appliance.
Tea and coffee also have more aroma
when prepared with fresh, BRITA-ltered
water.
To use the machine without a lter, simply
remove the lter holder and the lter
cartridge and adjust the machine settings
accordingly.
Important: The Filter Yes/No setting
controls the lter replacement indicator.
Changing the lter setting
►
Turn the appliance off with the on/off
switch.
►
Press and hold the temp. set button.
►
Turn the appliance back on with the on/
off switch – the
M
icon ashes.
►
Press the start/stop button to select the
Filter Yes/No setting:
Yes =
M
lights up
or
No =
M
does not light up
►
Release the temp. set button – the set-
ting is now stored, and the most recently
selected temperature lights up.
Note: To change this setting at any time,
repeat the above procedure.
After setting the lter to “yes”, the symbol
M
will light up after a certain time during
operation. The BRITA MAXTRA lter
cartridge is exhausted and needs to be
changed.
Loading ...
Loading ...
Loading ...