Loading ...
Loading ...
Loading ...
WARNING: The appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by a utility.
Install the appliance on a solid and level surface ensuring it has 20mm
clearance on each side. The appliance must not be installed on any textured
floor coverings (eg carpet, rugs).
Clean the lint filter and the condenser filter after each pro- gramme (refer to
CARE AND CLEANING).
Do not use water spray or steam to clean the appliance.
Do not use industrial chemicals to clean the appliance.
Replace a damaged supply cord only by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Do not try to repair the appliance by yourself. In case of repair please contact
our customer service.
The appliance must not be installed behind a lockable door, sliding door, or a
door with a hinge on the opposite side to the of the appliance, in such a way
that a full opening of the appliance door could be restricted.
Install the appliance in a well-ventilated, dust-free environment.
Do not install the appliance outdoors, in a damp location, ir in an area which
is prone to water leaks. In the event of a water leak, unplug the appliance and
allow it to dry naturally.
Do not install the appliance in a location where the ambient temperature
drops below 5°C. If install the product in a low temperature room, and using
the product continuously, there might be some water condensation and
drops on floor.
Do not place the appliance directly on a carpet, or close to a wall or furniture.
Do not expose the appliance to any frost, heat or direct sunlight or in the near
of heat sources(e.g. stoves, heaters).
Make sure that the electrical information on the rating plate agrees with the
power supply. If it does not, contact an electrician.
Do not use multi-plug adapters and extension cables. Make sure not to
damage the electric cable and the plug.
Use a separate earthed socket for the power supply which is easy accessible
after installation. The appliance must be earthed.
Servicing & Disposal
A damaged electrical cable must be replaced by a Haier service technician or
Loading ...
Loading ...
Loading ...