Loading ...
Loading ...
Loading ...
12
2.4 Installing door handles
Installing door handles
Take precautions to ensure that the handle does not
fall and cause any injury.
List of tools to be provided by the user
Allen wrench Phillips screwdriver
Installation procedure
1) Take the bolts
out of the accessories bag, then
use the Phillips screwdriver to screw the bolts into
the bolt holes in the refrigerator doors. See Figure
8.
2) Put the handle on the door over the bolt
and
make sure the handle is flush with the door's surface.
See Figure 9.
3) Secure the handle by rotating the handle screw
on the end, then check that the handle is firmly
mounted by jiggling it gently.
4) Install the cap
over the handle screw hole to
complete the installation.
BEFORE USING THE REFRIGERATOR
> Before use, remove all packing materials, including
bottom cushions, foam pads and tape from inside of
the refrigerator; tear o the protective film on the
doors and on the refrigerator body.
> Allow the refrigerator to sit still for two hours before
connecting it to the power supply and turning it on.
> The refrigerator must run for 2-3 hours or for
4 hours or more in the summer, when the ambient
temperature is high, before any fresh or frozen food
can be put inside of it.
Note
Bolt Handle screw
Bolt hole Screw hole cap
Figure 8
Figure 9
The hole
The screw
Loading ...
Loading ...
Loading ...