Loading ...
Loading ...
Loading ...
User Manual
31
MUTE
To change the Mute setting, use the encoder to select the desired state. Press the encoder
to apply the parameter, and the display will return to the DSP menu. Biamplified systems
will have a mute per bandpass. Pressing the Back button exits the menu without applying
a change.
GAIN
The system input gain can be changed in real time by turning the encoder.
Pressing the Back button exits to the main menu.
Delay
Delay can be enabled or disabled, and the delay time can be set from 0 ms to 2,000 ms.
User EQ
User EQ is enabled or disabled with this control. User EQ is edited in JBL Performance
software.
101DSP: MUTE CH1
Unmute Mute
V
101DSP: GAIN
-9.50dB
V
101DSP: DELAY
2126.94 ft 648.29 mt
V
1888.87 ms
101
DSP: User EQ
On Off
V
Speaker Mode (Full-range systems only)
For full-range systems, the speaker mode can be set to Array or Fill by turning the encoder,
then pressing on it to apply the selected setting. This change will load a speaker preset in the
speaker DSP, optimized for the indicated use case, and has no effect on User DSP settings.
SRX906LA speakers can also choose the SA preset.
Orientation (Subwoofers only)
For subwoofers, the speaker’s orientation can be set to Forward or Rear. Selecting Rear
loads a speaker preset with factory-optimized DSP settings for rear-facing subwoofers in a
cardioid array.
Array Size Compensation and Throw Distance Compensation
Array Size Compensation (ASC) and Throw Distance Compensation (TDC) can be enabled or
disabled and adjusted in .5 dB increments from -16 dB to +16 dB.
101
ASC Level: 1.0 dB
TDC: Enabled
TDC: Level: 0.0 dB
DSP
V
101
Forward Rear
DSP: ORIENTATION
V
101
Fill
ArraySA
DSP: MODE
V
Loading ...
Loading ...
Loading ...