Loading ...
Loading ...
Loading ...
-
- 12 -
-
12 Non-dismantle Cleaning
1)Take the red long hose from the accessories box. Connect one end to
return hose ofthe engine, and the other end to the return hose port of
the machine.
2)Run the engine, and checkthe testfluid bottle. When the level is up to
600-800ML,stop the engine.
3)Take the long blue hose from the accessory box. Connectone end to
the high pressure port ofthe machine,and the other end to the supply
hose of the engine fuel system.
4)Move the pump relay ofthe engine or short connect the fuel circuit of
the engine fuel pump.(In this case, please make sure the cover offuel
tank is open.)
5)Turn on the machine. Press Left or Right Arrowkey to select
Non-dismantle Cleaning, and set up the time as 20-30minutes.
6)Adjust system pressure, (normally the pressure should between
0.25-0.3Mpa).
7)Press RUN key, and turn on the engine after several seconds.
8)Pour Non-dismantle cleaning fluid into one of the measuring cylinder
ofthe machine (0.5 bottle for 4 cylinder engine, 0.75 bottle for 6
cylinder engine, and one bottle for 8 cylinder engine).
9)Adjust engine speed, make it to run 1-10 minute under idle speed,
10-15 minutes under medium and high speed;, and run under idle
speed again in the rest ofthe time.
10) When the setting time is zero, the machine will stop automatically.
Loading ...
Loading ...
Loading ...