Loading ...
Loading ...
Loading ...
Careandcleaningoftherefrigerator.
Cleaning the Outside
The door handles and trim. Clean with
a clod1 dampened widl soapy watex:
Dry with a soR cloth.
Keep the outside dean. Wipe with a clean
clod1 lighdy dampened with ldtchen
appliance wax or mild liquid dish
demrgent. Dry and polish with a clean,
soR cloth.
The stainless steel door panels and handles.
The stainless steel panels can be cleaned
with a commercially available stainless smel
cleaner or a similar product using a clean,
soft clodl. Do not use appliance wax, polish,
bleach or products containing chlorine on
stainless steel doors and handles.
For best results, (;E recommends using
stainless smel cleaner PM10X311 with
tile WX10X307 polishing cloth, or for
convenience the SS cleaning wipes, part
number WX10X10001.
Donot wipetherefrigeratorwith a soileddishcloth
orwettowel Thesemayleavea residuethat
canerodethepaint.Donotusescouringpads,
powderedcleaners,bleachor cleanerscontaining
bleachbecausetheseproductscanscratchand
weakenthepaint finish.
Cleaning the/nside
Tohelpprevent odors,leave an open box of
baldng soda in die flesh food and fleezer
compartments.
Unplugtherefrigerator beforecleaning If rids
is not practical, wring excess moisture out
of sponge or clodl when cleaning around
switches, lights or controls.
Use _,v}tiIil_g}tteI" and baldng soda solution--
about a tablespoon (15 ml) of baldng soda
to a quart (1 limr) of wamr This both cleans
and neutralizes odo_. Thoroughly rinse
and wipe d_>
Avoid cleaning cold glass shelves (onsome models)
with hot water becausethe extreme temperature
difference maycause them to break.Handleglass
shelves carefully Bumping temperedglass can cause
it to shatter
Donot washanyplasticrefrigeratorpartsin the
dishwasher
Donotcleanwith anyproductscontainingdetergent,
bleachorammonia.Theymaydamagethe
refrigerator
Condenser
There is no need for roudne condenser
cleanings in nomm/home opemdng
enviromnents. However; in enviromnents
that m W be particularly dusty or greasy; tile
condenser should be cleaned periodically
for efficient reflJgemtor operation.
Formodelswith a basegrille, die gqille must
be removed in order to clean die condense_:
Toremove the base grille:
Grasp it about 6" flom each end and pull
its bottom edge toward you.
Toreplace the base grille:
Insert tile tops of the metal (:lips into tile
ova/vents, making sure one of tile plastic
tabs on die back of tile grille goes into each
of the ovalvents. Then push tile bottom of
tile grille forward until it snaps into place.
Cleaning the condenser'.
Sweep away or vacumn up dust.
For models with a base grille, reach file
condenser by inserting a brush or vacuum
hose into the ova/holes.
For models without a base Nille, reach die
condenser by inserting a brush or vacuum
hose under tile bottom of tile reflJgerator
For best results, use a brush speciaUy
designed for dlis purpose. It is available
at most appliance parts stores.
8
Moving the Refrigerator
Be carefhl when moving tile refligerator
away flom the wall. All types of floor
coverings can be damaged, particularly
cushioned covenngs and those with
embossed smfaces.
BEFOREmovingtherefrigeratorawayfrom thewall,
besureto adjustthelevelinglegsup.(Seepage 10
fordetails.)
Pull die refligerator smdght out and return
it to position by pushing it straight in.
M(Mng die refligerator in a side direction
may result in damage to tile floor covenng
or reflJgerator
Whenpushingtherefrigeratorback,makesureyou
don'tfor overthepowercordoricemakersupplyline
(onsomemodels).
Loading ...
Loading ...
Loading ...