Loading ...
Loading ...
Loading ...
17
5.4 DRAINAGE
Self-evaporating system
The self-evaporating system uses the collected water to cool the condenser
coils for a more efficient performance. It is no need to empty the drainage tank
in cooling operation, drying operation and high humidity conditions. The
condensate water evaporates at the condenser and evacuates through the
exhaust hose.
For continuous operation or unattended operating in drying, please connect the
attached drain hose to the unit. Condensate water can automatically flow into a
bucket or be drained by gravity.
Switch off the unit before operating.
Remove the plug of the water outlet
opening, and keep it in a safe area.
Securely and properly connect the
drain hose and make sure it is not
kinked and clear of obstruction.
Place the outlet of the hose over a
drain or a bucket and ensure that
water could freely flow out of the
unit.
Do not submerge the end of the hose
into water; otherwise it can cause
"Air Lock" in the hose.
To avoid water spillage:
• As the negative pressure of the condensate drain pan is high, tilt the drain
hose downward toward the floor. It is appropriate that the degree of
inclination should exceed 20 degrees.
• Straighten the hose to avoid condensed water remaining in the hose.
Continuous drain hose
Remove the rubber
sealing plug.
Loading ...
Loading ...
Loading ...