Loading ...
Loading ...
Loading ...
15
operaTion
= Door gasket heating control
Condensed water on the gasket of the refrigerator doors
can be eliminated by activating the door gasket heating.
How to activate the door gasket heating
• Activate the setup mode by touching the Superfrost
icon for 5 seconds
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the Superfrost icon
- the display shows
• Touch freezer compartment
Up/Down icons to select
= at slight condensation of the gasket
= at heavy condensation of the gasket
= heating off
• Touch the Superfrost icon at the desired value.
• Exit setup mode by touching the freezer compartment
On/Off icon.
= Reset air filter LED
After the air filter in the toe kick area has been cleaned
the air filter LED must be reset. For how to clean the air
filter refer to chapter “Cleaning”.
How to reset the air filter LED
• Activate the setup mode by touching the Superfrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the Superfrost icon
- the display shows
• Touch the Superfrost icon again
- the display shows
• The air filter LED disappears.
• Exit setup mode by touching the freezer compartment
On/Off icon.
Figure 10
SuperFrost icon
Freezer On/Off icon
Freezer compartment Up/Down icons
Freezer temperature
display
Loading ...
Loading ...
Loading ...