Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
45
Appliances supplied with wall
spacers
The wall spacers supplied with some
appliances must be used in order to
achieve declared energy consumption
values. Appliance depth is increased
by approx.35mm with the wall
spacers fitted. If the wall spacers are
not used the functionality of the appli-
ance is not affected. Energy consump-
tion is only slightly increased with less
distance between the appliance and
the wall.
Fit the wall spacers onto the back of
the appliance on the top left and
right.
Installing the refrigeration appliance
Danger of injury and damage
due to the refrigeration appliance tip-
ping over.
There is an increased danger of in-
jury and damage if the refrigeration
appliance is installed by a single per-
son.
Two people are required for installing
the refrigeration appliance.
Tip: The refrigeration appliance must be
empty when it is installed.
Do not under any circumstances
remove the pouches (depending on
model) located between the back of
the appliance and the metal grille
(heat exchanger). These are important
for the correct functioning of the ap-
pliance. Their contents are non-toxic
and are not dangerous.
Release the mains cable from the
back of the appliance.
Remove the cable clip from the back
of the appliance first.
Carefully push the appliance into po-
sition.
Position the appliance with the wall
spacers (if fitted) or the back of the
appliance against the wall.
Loading ...
Loading ...
Loading ...