Loading ...
Loading ...
Loading ...
Checking the Charge Level
The charge level is indicated by watch hand
movement. Functions become disabled as
battery power goes low.
Important!
●
Should the battery go low or go
dead, expose the face (solar panel)
to light as soon as possible.
Immediately after pressing (C) to enter to the
Timekeeping Mode, the second hand will
move to one of the positions below to indicate
the battery charge level.
●
Battery Charged
2 o'clock12 o'clock
●
Low Battery Power
4 o'clock 6 o'clock
Also, the second hand jumps at two-second
or five-second intervals.
30
30
Two-second intervals Five-second intervals
Second hand
●
Above right figures indicate a lower battery
charge.
●
Dead Battery
All hands are stopped.
1
Power Saving Function
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the watch will enter Level 1 power saving. If
the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 2 power saving.
Level 1 :
Basic timekeeping functions are operational.
Level 2 :
Only the day indicator is operational.
Note
●
Note that the watch also may enter
the power saving state if its face is
blocked from light by your sleeve
while you are wearing it.
●
The watch will enter power saving
from the Timekeeping Mode only.
●
Recovering from Power Saving
Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Time Adjustment (GPS,
Time Calibration
Signal)
The watch’s time, day, and Home City (time
zone) settings can be configured in
accordance with a received GPS signal or
time calibration signal.
●
GPS signal position information: Used to
update Home City (time zone), time, and
day settings.
●
GPS signal time information: Used to
update time and day settings.
●
Time calibration signal: Used to update time
and day settings.
Important!
●
Before trying to receive GPS signal
time information and/or a time
calibration signal, first use GPS to
acquire position information and
configure Home Time (time zone)
settings.
●
Put the watch into the Airplane Mode
whenever you are inside an aircraft
or in any other area where radio
wave reception is prohibited or
restricted.
l Using the Watch on an Aircraft
Note
●
Areas where time calibration signal
reception is supported are limited.
When the watch in an area where
time calibration signal reception is
not supported, adjust time and day
settings based on GPS signals.
l Time Calibration Signal
Reception Ranges
Operation Guide 5455
4
Loading ...
Loading ...
Loading ...