Loading ...
Loading ...
Loading ...
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when GPS and
time calibration signal reception is not
possible for some reason.
Selecting a Time Zone
Use the procedure in this section to select a
city (time zone) to use as your Home City. If
you are in an area that observes summer time,
you can also enable or disable summer time.
Note
●
The initial factory default summer
time setting for all cities (time zones)
is “AT (AUTO)”. In many cases, the
“AT (AUTO)” setting lets you use the
watch without switching between
summer time and standard time.
●
In the cases described below,
receiving GPS position information
will automatically cause “AT
(AUTO)” to be selected for the
summer time setting.
ー
When the time zone of the current
receive operation is different from
the watch’s time zone setting prior
to the receive operation.
ー
When the time zone is
unchanged, but the acquired
position information is for a
geographic area with different
summer time rules (start date, end
date)
1.
Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
The mode hand indicates the acquisition
status of position information for the
currently selected time zone.
“P”: Available
“N”: Not available
30
Crown
Time zone
2.
Rotate the crown to change the time zone.
●
You can also select a time zone whose
name is not indicated on the face of the
watch.
●
For information about time zones, see
the “City (Time Zone) List”.
3.
To change the summer time setting, press
(A).
●
While the mode hand is pointed at “AT
(AUTO)”, “STD”, or “DST”, you can hold
down (A) for about one second to cycle
the summer time setting in the
sequence below.
“AT (AUTO)”n“STD”n“DST”
3
0
●
“AT (AUTO)”
The watch switches between standard
time and summer time automatically.
●
“STD”
The watch always indicates standard
time.
●
“DST”
The watch always indicates summer
time.
4.
Push the crown back in to its normal
position.
Summer Time
Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.
Adjusting the Time and Day
Setting
1.
Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
30
Time zone
Crown
MinutesHours
2.
Hold down (C) for about 10 seconds.
This causes the second hand to move to
12 o’clock, and enables the minute setting
operation.
3.
Rotate the crown to change the minute
setting.
4.
Press (C).
The hour hand will move slightly,
indicating that the hour setting operation
is enabled.
5.
Rotate the crown to change the hour
setting.
6.
Press (C).
This changes to the year setting
operation.
80
90
30
40
20
50
70
10
60
00
＋
−
Year (10’s digit)
3
＋
−
8
9
4
2
5
7
1
6
0
Year (one’s digit)
7.
Rotate the crown to move the hour hand
to the desired setting for the year ten’s
digit, and the minute hand to the desired
one’s digit.
Operation Guide 5455
11
Loading ...
Loading ...
Loading ...