Loading ...
Loading ...
Loading ...
6
accessories, or storing power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the power
tooTs operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
i) Please confirm the number of voltage volts before use. The working voltage is
not more than ±5%. If it is more than that, it will cause motor burning and leakage
accidents.
j) During construction, please pay attention to avoid water entering the motor or
blocking the ventilation hole, so as not to reduce the heat dissipation performance
of the motor and cause the motor to burn down.
k) In the steel plate construction, please pay attention to the safety of the lower
layer of personnel and goods, iron beam and column drilling, pay attention to the
safety of the structure of the building.
L) In suspension operation, the safety belt must be tightly tied and the magnetic
drill fixed to prevent sudden power failure or power failure caused by accidents.
M) Do not cut the power cord or change the plug yourself. This will cause the
machine to burn out.
Service
Loading ...
Loading ...
Loading ...