Loading ...
Loading ...
Loading ...
10
OPERATION AND USE
1. The drill bit must be sharp. When installing the hollow drill, insert the central
needle into the hollow drill, install the hollow drill on the output shaft, and finally,
tighten the fixing screw to secure the hollow drill.
2. Place the magnetic drill near the required drilling position, plug in the power
plug, align the drill bit with the machining position, and then turn on the switch of
the electromagnet so that the electromagnet can be absorbed on the surface of
the magnetic materials such as steel. (plate thickness more than 15mm)
(Pay attention to selecting appropriate adsorption materials and ensure that
there is no debris on the adsorption surface, check whether the magnetic force is
normal).
3. The machine should be fastened with a safety belt when working on the side or
top.
4. Thread one end of the safety belt into the handle hole of the frame, tie the
other end to the strong frame, and then buckle into the fasteners
(Try to pull with your hand, it should not be loose and displacement).
5. Turn on the power switch to check whether the drill bit is beating and the sound
is stable. If everything is normal, open the water valve first so that the cutting fluid
in the oil can flow out, and then turn the handle to feed
Loading ...
Loading ...
Loading ...