Tripp Lite BHDBT-K-SI-ER Owner's Manual

Loading ...

Installation

Matrix Transmitter Installation

Notes:

1. The below installation diagram and instructions are for a standard HDBaseT HDMI over Cat5

Matrix Transmitter installation. For instructions on adding transceivers to your installation, refer to

the Extender Kit with Transceiver Installation section.

2. The installation diagram below shows a BHDBT-T-SI-4X2. Installation will be the same for the

BHDBT-T-SI-4X4, except for the number of HDMI Output ports.

3. See the Product Features section of this manual for models compatible with your Matrix

Transmitter and for information on your model’s maximum supported distances and resolutions.

4. Test to make sure the entire installation works properly before pulling cables through ceilings/walls.

5. To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 or 23 AWG solid

wire Cat6a cable. Using stranded wire cable or cable with a gauge (AWG) size higher than that

recommended will result in shorter extension distance. Higher gauge cabling such as 26 AWG has

a more limited transmission capability than lower gauge cabling. All Tripp Lite N202-Series Cat6

cables are made with 24 AWG solid wire cabling. Extended lengths of 23 AWG solid wire Cat6a

cable is available from Tripp Lite as a custom order.

6. When using a 28 AWG HDMI cable and displaying video resolutions higher than 1080p, the HDMI

cables connecting the source and the monitor must not exceed 6 feet (1.8 m). When using a 24

AWG HDMI cable, you must not exceed a 16-foot (5 m) length.

Each receiver unit includes one set of IR-IN and IR-OUT cables. It is up to the user to determine

whether the cables will be used to extend an IR signal from the transmitter side to the receiver side,

or the receiver side to the transmitter side. In most installations, the cables will be used to control the

HDMI source (e.g., Blu-ray player) from the same location as the monitor connected to the receiver.

8. When using the IR remote control extension functionality, only one IR device can be controlled

from a single location. For example, a single Blu-ray player cannot be controlled from multiple

receivers in an installation; you must choose one receiver in which to control it from.

Display 1

Display 2

4Kx2K Player

HD Satellite

Game Console

Media Server

IR Control Pad

Super Terminal

for RS-232

IR-IN/IR-OUT Units

18-11-133-933418-EN.indd 10 11/15/2018 10:35:35 AM

Loading ...

Tripp Lite BHDBT-K-SI-ER HDBaseT HDMI Over Cat5e/6/6a Extender Kit