Loading ...
Loading ...
Loading ...
6 Customer Care Center 1-800-732-2677
Install the Pet Door
4A. After cutting the opening in the screen, place the Exterior Frame on top of the Interior Frame.
Installer can put a small bead of silicone caulk in each corner of the Interior Frame
before installation.
4B. Use a rubber mallet and tap the two frames together until fully seated. Make sure you have a solid surface
under the door to support it while the frames are assembled. Use a Phillips screwdriver to screw the two frames
together using the six included flat-head screws.
4C. Place the screen door back on the hinges.
It is not recommended to use the locks if your pet is forceful when using the Pet Screen
Door to keep from damaging your screen or the pet door.
Train Your Pet
5A. Rehang your door and begin training your pet. It may help for you to be on
one side of the door and your pet on the other. Lift or tape open the flap and
try to talk your pet through the pet door. After your pet has gone through
a few times, allow the flap to touch your pet’s back so they will become
comfortable using the pet door. If your pet will not go through the door, tape
the flap open until they use it on their own. Do not use the locks until your pet
is familiar with using the pet door.
Helpful Tip:
Try treats or toys to encourage your pet to go through the pet
door and become comfortable using it.
Step 4
Step 5
5A
4A
4C
4B