Loading ...
Loading ...
Loading ...
12
The pump is excessively noisy The water tank is empty Fill the tank
The tank is not correctly in place and the
valve on its base is not open
Press the tank down lightly to open the valve on
the bottom
There are air bubbles in the tank
connector
Follow the instructions given in the “Hot water”
section until water is delivered
The coee is dripping too
slowly (delivered from the
spout too slowly)
The pre-ground coee is pressed down
too rmly
Press the coee down less rmly
There is too much pre-ground coee Reduce the quantity of pre-ground coee
The espresso boiler outlet is blocked Clean as indicated in the “Cleaning” section
The lter is blocked Clean as indicated in the “Cleaning” section
The pre-ground coee is too ne or damp Use only pre-ground coee for espresso coee ma-
kers and make sure it is not damp
The wrong type of pre-ground coee is
being used
Use a dierent type of pre-ground coee
The coee has an acid taste Inadequate rinsing after descaling After descaling rinse the appliance as indicated in
the “Descaling and Rinse” section
No milk froth is formed when
making cappuccino
ECP3X30 model: The ring on the cap-
puccino maker is NOT in the cappuccino
position.
ECP3X30 model: Place the ring in the CAPPUCCI-
NO position.
Milk not cold enough Always use 2% milk at refrigerator temperature.
Cappuccino maker dirty Clean the holes in the cappuccino maker
thoroughly
Limescale in the water circuit Descale as described in the “Descaling” section