Loading ...
Loading ...
Loading ...
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic components
or connectors.
Available internal options
• DDR3 DIMM
• Flash memory
– Fonts
– Firmware
• Forms Barcode
• Prescribe
• IPDS
• Printcryption
• Hard disk
*
• Internal Solutions Ports (ISP)
*
– Parallel 1284‑B interface
– MarkNet N8130 10/100 fiber interface
– RS‑232‑C serial interface
*
This internal option is available only in the M3150de printer model.
Accessing the controller board
Access the controller board to install internal options.
For M1145, see
“Accessing the controller board” on page 37.
For M3150, see
“Accessing the controller board” on page 70.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the electrical outlet before continuing. If you have other devices attached to the printer, then
turn them o as well, and unplug any cables going into the printer.
Additional printer setup 12
Loading ...
Loading ...
Loading ...