Loading ...
Loading ...
Loading ...
30
Phillips screwdriver aluminum tape
Rigid or UL-listed
flexible metal
4'' (10.2 cm) duct
Elbow 4'' (10.2 cm)
Gloves
Rear
Exhaust Duct
Adapter
Duct
Knockout
CHANGE THE DRYER VENT LOCATION
our new dryer is shipped to vent to the rear. It can also be configured to
vent to he bottom or left side (as seen from the front).
An Adapter kits which are standard components can be purchased from
any retailer. This kit contains the necessary duct components to change
the dryer vent location.
Tools and materials you will need
1. Remove the two rear exhaust retaining screws, then pull out the exhaust duct.
Retaining
Screw
Option 1: Side venting
2. Press the tabs on the knockout and carefully remove the knockout for
the desired vent opening.
Attach the adapter duct onto the blower housing of the dryer as shown.
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Dryer Care
Troubleshooting
Appendix
Loading ...
Loading ...
Loading ...