Loading ...
Loading ...
Loading ...
5
4. When you have finished blending, turn the dial to “0 “ to turn off. Make sure the blades
have come to a complete stop before attempting to remove the jar from the base. To
Remove the Jar, lift the Jar from the base.
5. Remove the lid and serve.
Blending Tips:
• When blending thick mixtures such as smoothies, power drinks or milkshakes; press the
pulse button several times to begin the blending process.
• Filler cap should only be removed to add ingredients. Do not remove the lid while the
blender is in use.
• Large foods should be chopped before placing into blender.
• While the appliance is OFF you can use a rubber spatula to scrape the sides of the jar.
Make sure you remove all utensils before continuing. Place Lid back and blend.
• The Lid cap holds up to 30ml of liquid and can be used to measure when adding ingredients.
• Please do not use your blender to make Bread Crumbs, Grinding Coffee Beans, and
Chopping Nuts, Whipping Cream, Beating Egg whites, Mixing Dough, Mashing Potatoes,
Grinding Meats or Extracting Juice.
• When using the Pulse function use short bursts. Allow the blades to stop completely
between pulses. Do not Pulse for more than 1 minute.
• It is recommended to begin blending at a low speed and gradually increasing, if necessary.
• If you blend warm ingredients that are still steaming, remove the filler cap but cover the
opening with a cloth to avoid splattering and only blend on the lowest speed.
• Do not blend any of the following products in your blender: Large pieces of Frozen Food,
Raw Turnips, Sweet Potatoes, Potatoes, Bones, Hard Raw Meats, or Boiling Liquids (allow
to cool for 5 minutes).
• Do not operate blender without the lid.
• Do not store food in the Jar.
• Do not use blender if the Jar is chipped or cracked.
Cleaning Your Blender:
WARNING: Always unplug the product and allow it to cool before cleaning or storing it. Allow
the Blades to come to a complete stop before removing Jar from base.
• Only the Blending Jar, Lid, Filler Cap, and Blade Assembly can be washed under running
water. Do not use abrasive cleaners or pads.
• Handle blades with extreme caution. You may use a small nylon bristle brush to remove
food that has adhered to the Blade assembly.
• It is recommended to rinse parts immediately after use to make cleaning easier.
• The motor base may be wiped with a soft damp cloth.
NOTE: NEVER IMMERSE THE BASE
• Dry all parts thoroughly before storing in a cool, dry place, away from reach of children.
Loading ...
Loading ...
Loading ...