Loading ...
Loading ...
©
2022 DJI All Rights Reserved.
1
Using this Manual
Legend
Warning Important Tips
Caution
1. When not in use, store the Zenmuse H20N in the storage case and replace the desiccant packet
as necessary to prevent fogging the lenses due to excessive ambient humidity. If the lenses fog
up, the water vapor will usually dissipate after turning on the device for a while. The recommended
storage environment is a relative humidity less than 40% at a temperature of 20±5° C.
2. Do not expose the infrared camera lenses to a strong energy source such as the sun, lava or laser
beam. The temperature of the observation target should not exceed 800° C, otherwise it will burn
the camera and cause permanent damage.
3. Do not place the product under direct sunlight, in areas with poor ventilation, or near a heat source
such as a heater.
4. Do not frequently power on/off the product. After it is turned off, wait at least 30 seconds before
turning back on, otherwise the product life will be affected.
5. Under stable laboratory conditions, the Zenmuse H20N achieves an IP44 protection rating by
IEC60529 standards. However, this protection rating is not permanent and may reduce over time
after long-term use.
6. Make sure the gimbal port and gimbal surface are free from any liquid before installation.
7. Make sure the gimbal is securely installed onto the aircraft, the microSD card slot cover is clean
and rmly in place.
8. Make sure the gimbal surface is dry before opening the microSD card slot cover.
9. Do not plug or unplug the microSD card during use.
10. Do not touch the surface of the camera lenses and keep it away from hard objects, as doing so
may lead to blurred images and affect the imaging quality.
11. Clean the surface of the camera lenses with a soft, dry, clean cloth. Do not use alkaline
detergents.
Loading ...
Loading ...
Loading ...