Loading ...
Loading ...
Loading ...
Zenmuse H20
N
User Manual
14
©
2022 DJI All Rights Reserved.
4
1
2
3
5
Night Scene
Choose Auto Night Scene mode, or turn Night Scene on or off when the main screen shows the zoom
or the wide camera view. The setting of the Night Scene mode applies to both the zoom camera and
the wide camera simultaneously. In Night Scene mode, the recording frame rate of both the zoom and
wide cameras will be decreased to optimize the image quality in low-light environments.
Auto: Night Scene mode will be enabled automatically in low-light environments.
ON: Tap to turn on Night Scene mode. Select from Enhanced Noise Reduction and IR Light when
Night Scene mode is set to ON. Enable Enhanced Noise Reduction to achieve a better image quality.
Note that the recording frame rate will decrease further if Enhanced Noise Reduction is enabled. Use
this function with caution for situations where low latency in liveview is required. If IR Light is enabled,
the zoom camera will disable the IR lter to optimize the image quality in low-light environments. The
zoom camera will display a black and white image once IR Light is enabled.
Temperature Measurement (for infrared thermal cameras only)
Spot Meter
Tap any position within the temperature measurement area on the screen to measure the temperature.
Area Measurement
Drag to select an area within the temperature measurement area on the screen. The lowest temperature,
highest temperature, and their corresponding locations in this area will be displayed on the screen.
Tap the icons below the selected area box to:
1. Close the area measurement page;
2. Maximize the page;
3. Take a screenshot of the measurement result;
4. Enable/disable Temperature Alert;
5. Set alert temperature. After Temperature Alert is enabled, users can set the alert temperature.
Once the highest temperature exceeds the set alert temperature, the remote controller will issue a
warning sound.
Loading ...
Loading ...
Loading ...